LT95 Input Shaft Seal

Calculated at Checkout
Easter Egg:

For more useful information on this part, please sign in or register.

Corteco brand (good stuff) oil seal fitted in the rear of the oil pump housing on the LT95 input shaft. Unless you like removing gearboxes don't risk a cheap oil seal here. This seal is included in our clutch kit KLR-CK4.

To fit this you will need to remove the oil feed control ring - be careful, these rings are expensive. Also check for a sharp lip on the input shaft in front of the surface for this seal.

*** Specific Brand Part ***
This product is not specific to one brand. If the product photo shows or the description lists a specific brand, we may provide you with the same or similar part of a different brand. For more information, please see our Terms and Conditions.

Superseded and related part numbers: